Accessories
For more information on how to purchase the following accessories to our automatic waterers or for additional parts, please contact your
local dealer or distributor.
Hydrants
Variable flow design, everything from a small trickle to
a full
stream. Easy service from above, all
parts accessible without
digging. Available in
seven lengths.
The quality leader in frost proof hydrants
1/2" valve Float and valve sold separately
Ritchie 1/2" valves come in three
pressure ratings as shown below. Although different pressure
rated valves may be used in a fountain, each fountain will
only accommodate one size and configuration of valve.
1/2”
*Part #
GPM
Pressure Range
White
12574
4.8
Low, 5-40 psi
Red
12575
3.4
Moderate, 40-60
psi
Green
13597
1.45
High, 60-80 psi
*Part numbers are for valve assembly only.
3/4" valve NEW FLOAT DESIGN Float and valve sold separately
Ritchie 3/4" valves come in four pressure ratings as shown below.
Although different pressure rated valves may be used in a fountain,
each fountain will only accommodate one size and configuration
of valve.
3/4”
*Part
#
GPM
Pressure Range
White
16697
33
Low, 5-40
psi
Red
11101
20
Moderate,
40-60 psi
Green
15377
16.5
High, 60-80
psi
Blue
18197
5
Very High,
80-100 psi
*Part numbers are for valve assembly only.
Immersion Heater New Improved design and function
Ritchie’s newly designed immersion heater now protects against corrosion and will not deteriorate. Armed with an upper end limit switch and a more accurate, built in thermostat, this heater provides a better transfer of heat at a more efficient rate.
For use in all poly units. Protects the valve chamber and troughs from freezing. The immersion heater has a built in thermostat. Plug in installation for ease in removal and replacement.
CSA and UL approved
Self Regulating Heat Cable
For use with all poly units.
Protects the valve and supply line from freezing. Built in
thermostat reduces heat as the temperature rises, but never
shuts off completely.
Ritchie Thermal Tubes
Permanently
protect your vertical water supply line from freezing. Ritchie Thermal Tubes provides TWO INCHES of insulation all around with an r-Factor of 7 per inch.
Available in 1 foot, 2 foot, and 4 foot sections.
***Warning - Do not cut in half or modify in anyway. Cutting and exposing the insulation of the thermal tube will void any insulation properties.
Automatically maintain your stock tank water level by providing rapid refill rates (shown to the left). Ritchie Stock Tank Valves are constructed of high density impact resistant plastic construction that keep animal safety in mind by providing smooth rounded surfaces.
The latest version of the flash player is required
to view the our Ritchie Assistant above.
